Asturo
is the leader in spray equipment in Italy and since 1925, it has lead the
way in spray gun design in Europe. Today, In the ECO systems, the CFM requirement is around 7, (5.1* for
the pressure feed gun) a figure easily delivered by a modest compressor size
(check your compressor rating to be sure). The HTE series requires slightly
more CFM.
ECO SERIES
The ECO is the premier HVLP spray gun in the
Asturo lineup.
ECO/S
Body:
forged anodized aluminum
Nozzle/needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets: Teflon
Cup: Aluminum, 600cc (21 oz) with drip-proof vent hole. Other cup types available. Call for quote and
availability
Working : 21 psi (at gun inlet)
Air Consumption: 7 cfm
Needle/nozzle/air cap: 1.1, 1.3, 1.5, 1.7, 1.9, 2.2.
(Standard configuration is 1.7 unless otherwise requested)
#8200 - $399.00
ECO/SSP
Body:
forged anodized aluminum
Nozzle/needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets: Teflon
For use with pressure tanks, cups or pumps
Working Pressure: 21 psi (at gun
inlet)
Air Consumption: 5.1 cfm
Needle/nozzle/air cap: 1.1, 1.3, 1.5, 1.7, 1.9, 2.2.
(Standard configuration is 1.5 unless otherwise requested)
#8205 - $389.00
Call us for a custom quote on the ECO with
our pressure pots.
HTE
is a new word in spray technology that you'll be hearing more about in
the coming years. HTE uses conventional high pressure to atomize a finish
(unlike HVLP which uses low pressure) but still achieves 65% or greater
transfer efficiency. What this means to you is that you get all the benefits
of regular high pressure spraying such as incredible atomization, fast fluid
delivery and wide fan patterns, but at the transfer efficiency of HVLP.
These new guns are re-engineered Legend guns, which have been a staple in
the Asturo lineup for years.
Asturo achieves this
process without the air restriction or diffusion that's used in HVLP. This
gives the finisher wide fan patterns and tremendous fluid delivery
rates, while at the same time keeping wasted finish to a minimum.
LEGEND SERIES
The Legend K Series is synonymous
with spray finishing in Europe. Available as a gravity, siphon or
pressure feed, the Legend has very low air consumption and delivers an
incredible finish. A proven performer in Europe since 1992.
K1/S
Body:
forged anodized aluminum
Nozzle/needle/springs: stainless steel
Air cap: aluminum
Gaskets: Teflon
Cup: Nylon, 600cc (21 oz) with drip-proof vent hole. Aluminum cup
available.
Fan width: 11.4"
Operating Pressure : 58 psi (at gun inlet)
Air Consumption: 8.5 cfm
Needle/nozzle/air cap: 0.8, 1.0, 1.2, 1.3, 1.4, 1.7, 1.9, 2.2, 2.5mm.
Price: $330.00
K1/SSP
Nozzle/needle/springs:
stainless steel
Air cap: aluminum
Gaskets: Teflon
For use with pressure tanks or pumps
Fan width: 14"
Operating Pressure: 50 psi (at gun inlet)
Air Consumption: 6-8 cfm
Needle/nozzle/air cap: 0.8, 1.0, 1.2, 1.3, 1.4, 1.7, 1.9, 2.2, 2.5mm.
Price: $325.00
BACK TO TOP
Copyright © 2000-2008
Homestead Finishing Products All rights reserved.
