Homestead
Finishing Products is an authorized dealer for 3M/Accuspray, a company that has led the way in HVLP finishing for
decades. Recognizing early on the benefits of HVLP finishing they designed a
radically new gun from space-age composite materials, avoiding the heat and
weight problems of other manufacturers. The Series 10 gun has been a
mainstay in finishing shops worldwide.
Choosing a complete Turbine package
includes everything you need to start enjoying the benefits of HVLP
spraying. No need for a compressor, fittings, or filters when you choose a
turbine system. When you're done, the turbine units can be stowed away
easily until next time.
Homestead
Finishing Products is an authorized Accuspray Dealer.
If you don't see a product, just
ask
and we'll provide a quote.
200
SERIES TURBINE SYSTEMS
The 200 Series Turbines from Accuspray
all feature a dual filtration system for clean, dry air. All turbine units
are lightweight and portable and easy to maintain. Cooling fans are standard
on all turbines except the 22sp and 23K and work to keep hot air at the gun to a
minimum.
Note:
Effective 11-1-2007, Accuspray no longer includes gun lube or a regulator
with their turbine package systems, even though it is noted in the
instructions.
22sp Series -
So portable and
lightweight, this system comes with a shoulder strap. Ideal for touchups and
spraying light viscosity coatings like stains, lacquers shellac and thinned
varnishes. Perfect for on-site touch up pro's, detailing work and other
light duty work. Package includes turbine, gun and hose assembly.
Turbine: 2
stages, 5.7" blade
Air Rating: 50 cfm at 3psi.
Weight: 12 lb
Gun:
Series 11, bleeder,
composite fluid passages
Air cap: Delrin
Cup: pressurized 1 qt.
10' hose assembly
Needle/nozzle/air cap (mm): .051 needle/nozzle, #10 air cap standard
#22sp -
$529.00 - List $645.00
23K Series -
Portable and
lightweight, this unit is great for stains, sealers, lacquers, varnishes and
urethanes. Package includes turbine, gun and hose assembly.
Turbine:
3
stages, 5.7" blade
Air Rating: 85 cfm at 5psi.
Weight: 18 lb
Gun:
Series 10, non-bleeder,
stainless steel passages
Air cap: Delrin
Cup: pressurized 1 qt.
30' hose assembly includes
3' whip assembly (not shown)
Needle/nozzle/air cap (mm): .043 needle/nozzle, #9 air cap standard
(Standard configuration - other setups available)
#23K 3344 -
$820.00 - List $1,025.00
SPECIAL - Accuspray 23K System with
3M PPS 1 quart
Cup,
plus 25 lids and liners. - $965.00
(Also includes Accuspray
#41-22 aluminum cup)
230K Series -
A larger turbine
with more power and a cooling fan make this the best choice for all
finishes, particularly water bases and latex paint.
Turbine: 3
stages, 7.2" blade
Air Rating: 6 psi at 115 cfm
Weight:
28 lb
Gun:
Series 10, non-bleeder,
stainless steel passages
Air cap: Delrin
Cup: pressurized 1 qt.
30' hose assembly includes
3' whip assembly
Needle/nozzle/air cap (mm): .043 needle/nozzle, #9 air cap standard
(Standard configuration - other setups available)
#230K 3344 -
$980.00
- List $1,225.00 (with 1 qt pressurized cup under gun)
#230G-52625 - $1208.00 - List $1295.00 (with
600ml gravity gun)*
#230GP-444A - $1283.00 - List $1365.00 (with
600ml pressurized gravity gun)
SPECIAL - Accuspray 230K System with
3M PPS 1 quart
Cup,
plus 25 lids and liners. - $1125.00
(Also includes Accuspray
#41-22 aluminum cup)
* Non-pressurized
gravity cup
240K Series -
Step up to 4 stages and higher psi. This
portable unit kicks up the psi to give you better speed or spray heavy
bodied coatings without sacrificing atomization quality. Best for high end
finishing, water base paints and primers.
Turbine: 4
stages, 5.7" blade
Air Rating: 7 psi at 85 cfm*
Weight: 25 lb
*the reduced cfm is what increases the psi.
Gun:
Series 10, non-bleeder,
stainless steel passages
Air cap: Delrin
Cup: pressurized 1 qt.
30' hose assembly includes
3' whip assembly
Needle/nozzle/air cap (mm): .043 needle/nozzle, #9 air cap standard
(Standard configuration - other setups available)
#240K 3344 - $1,140.00 - List $1,425.00
#240G-52625 - $1295.00 - List $1495.00 (with
600ml gravity gun)*
#230GP-444A - $1365.00 - List $1565.00 (with
600ml pressurized gravity gun)
SPECIAL - Accuspray 240K System with
3M PPS 1 quart
Cup,
plus 25 lids and liners. - $1285.00
(Also includes
Accuspray #41-22 aluminum cup)
240c Series - the same powerful turbine as the 240, but with a
built in compressor for operating pressurized cups. Get all the versatility
of remote pressure feed spraying in a complete package; no compressor
required. A 1/2 pint touch up gun is perfect for smaller jobs. Get the best
of everything Accuspray has to offer in one package.
Turbine: 4
stages, 5.7" blade
Air Rating: 7 psi at 85 cfm*
Weight: 27 lb
*the reduced cfm is what increases the
psi.
Gun:
Series 10, non-bleeder,
stainless steel passages
Air cap: Delrin
Cup: remote pressurized 2 qt. and 8 oz. cup for smaller jobs
Hoses: includes 25' atomizing air
hose and
6' air/fluid hoses from 2 qt cup to gun.
Note: We recommend a water filter
be installed at the 2 qt pot inlet if spraying in warm and humid conditions
(#W1424).
15' air/fluid hoses are
available as an accessory package. See parts below.
Needle/nozzle/air cap (mm): .043 needle/nozzle, #9 air cap
(Standard configuration - other setups available)
#240C 5344 -
$1,359.00 - List
$1695.00
#W1424 - Re-useable water filter -
$33.00
#41-22 - 1 Qt. Pressurized Cup -
$81.95
TNR
SERIES TURBINE SYSTEMS
The TNR Series Turbines from Accuspray
all feature superior noise reduction* and an integral cart built into the
frame. Package includes the Series 10 turbine spray gun and multiple
atomizing sets to cover a wide range of applications. All models feature an
additional cooling fan.
*
Testing shows regular Accuspray Turbines average 87 db, while TNR Series
average 72 db.
2030 -
A 3 stage turbine with 1.1mm and 1.3mm setups
covers most general woodworking jobs and will spray everything from stains
to clears.
Turbine: 3
stages
Air Rating: 5 psi at 85 cfm
Gun:
Series 10, non-bleeder,
stainless steel passages
Air cap: Aluminum - #5, #7
Cup: pressurized 1 qt.
30' hose assembly includes
3' whip assembly
Needle/nozzle/air cap (mm): .043 and .051 needle/nozzle, #5 and #7
aluminum air caps
#2030 -
$1099.00
- List $1,249.00
SPECIAL - Accuspray 2030 System with
3M PPS 1 quart
Cup,
plus 25 lids and liners. - $1244.00
(Also includes
Accuspray #41-22 aluminum cup)
2040 -
A 4 stage turbine with more psi and 3
atomizing sets for greatest versatility in woodworking applications. Best
seller!
Turbine:
4
stages
Air Rating: 7 psi at 90 cfm
Gun:
Series 10, non-bleeder,
stainless steel passages
Air cap: Aluminum - #5, #7 & #9
Cup: pressurized 1 qt.
30' hose assembly includes
3' whip assembly
Needle/nozzle/air cap (mm): .043, .051 and .061 needle/nozzle, #5, #7
and #9 aluminum air caps
#2040 -
$1399.00
- List $1,599.00
SPECIAL - Accuspray 2040K System with
3M PPS 1 quart
Cup,
plus 25 lids and liners.
$1544.00
(Also includes
Accuspray #41-22 aluminum cup)
2045 -
A 4 stage turbine and built in compressor.
Comes with a 2 qt remote pressure pot and 1/2 pint detail cup, and 2 regular
atomizing sets and 1 high solids atomizing set for high viscosity paints and
latexes. The larger psi and cfm rating makes hard to atomize finishes
spray better and faster.
Turbine:
4
stages
Air Rating: 8 psi at
95 cfm
Gun:
Series 10, non-bleeder,
stainless steel passages
Air cap: Aluminum - #5, #7
Cup: pressurized 2 qt. and 1/2 pint
25' hose assembly
to cup, 6' air/fluid hoses from cup to gun
Needle/nozzle/air cap (mm): .043, .051 and .061U needle/nozzle, #5,
#7 and #726 aluminum air caps
#2045 -
$1675.00
- List $1,895.00
Note: We recommend a water filter
be installed at the 2 qt pot inlet if spraying in warm and humid conditions
(#W1424).
15' air/fluid hoses are
available as an accessory package. See
parts.
#W1424 - Re-useable water filter -
$33.00
Turbine HVLP System Advantages vs. Compressors
If you're looking to take the spray finish
plunge and don't own a compressor, a turbine driven HVLP system is your best
bet. Also, if portability is an issue, you can't beat these all-in-one
systems. All you need is an electrical outlet and the you're all set
(turbines run on less than 12 amps). All our Accuspray Turbine systems come
as a complete package, with turbine (your air source), a pressurized 1 quart
gun, and 27' heavy duty turbine hose with a 3' whip assembly. You don't have to buy anything
else, no filters, fittings or air hoses. And even if you do own a
compressor, you can easily convert the Series 10 gun that comes with all our
turbine systems.
We looked at many different turbine
systems before settling on the Accuspray Turbine system. Our decision to
carry this product is because we feel these systems far outperform any other
turbine system on the market. Check out these advantages:
Series 10 Gun
