Home Articles Contact Us Our Dealers Dye FAQ's Forum Information
Links MSDS Search Jeff's Schedule Site Map Technical

 

 

PRODUCT AISLES

PRICING & ORDERING INFO 
________

ABRASIVES
-------------------

BOOKS & VIDEOS
-------------------

BRUSHES
-------------------

CLOSEOUTS
-------------------

CONTAINERS
-------------------

FINISHES
-------------------

HVLP SPRAY EQUIPMENT
-------------------

PASTE WOOD FILLERS & GLAZES

-------------------

POLISHING & RUBBING OUT
-------------------

STAINS & COLORANTS
-------------------

SAFETY PRODUCTS
-------------------

TOUCH UP
HIDE GLUE SOLVENTS MISC.

-------------------

USED, B, & CLOSEOUT SPRAY EQUIPMENT
-------------------
 

 



ASTUROMEC HVLP Spray Guns 

    


Homestead's TransTint Dyes are a solution of metal-complex dyes in a special solvent that offers the finisher many unique options in applying the colors. Sizes available (plastic bottles) - 2 fl. oz., 8 fl. oz., 16 fl. oz.

"TransTint Dyes are superior...and the colors are gorgeous."
Chris Minick -- Fine Woodworking Magazine

 

 

 TO USE AS A DYE STAIN   Mix with tap or distilled water for an economical, non-flammable stain.

OR mix with alcohol for a fast-drying, non-grain raising stain.  No waiting or straining is necessary because the dye is pre-dissolved.

Suggested mix ratio is 2 oz. dye per 1/2 gallon solvent (increase or decrease ratio to suit need).  Dye solutions can be applied by brush, rag, spray, or sponge.  When using a water-reduced dye, a pre-grain raising is advisable -- apply the dye with an abrasive pad like maroon Mirlon.

 TO USE AS A FINISH TONER  One of TransTint Dyes most unique features is their compatibility with a wide range of finishing mediums.  Simply add the dye concentrate directly to shellac, water-base finishes, solvent lacquers, and catalyzed varnish or lacquers.  Add any amount up to 1 oz. per quart.  All 19 dye colors (10 wood tones & 9 accent colors) are intermixable to produce custom shades.

TransTint Dyes can be added to some oil-based products.  The dye can be added directly to linseed or pure tung oil. To add to oil based varnishes mix 1 part dye with 4 parts acetone before adding to the finish. Do not exceed 2 oz. of this mixture per quart.  Shake solution thoroughly before applying to wood.  TransTints cannot be added to most of the “Danish” oils or finishes thinned with a high ratio of mineral spirits.

NOTE: When using any dye or colorant, we highly recommend testing your colors first on scraps or cut-offs along with your selected top coat before applying to your projects. TransTint Dyes are not for exterior use.

Pricing - All Colors   

$15.50 - 2 fl. oz plastic bottle (buy 1-3)
$13.95 ea. (buy 4-9)
$12.95 ea. (buy 10+)

$39.95 - 8 fl. oz. plastic bottle
$65.95 - 16 fl. oz. plastic bottle
$118.70 - 32 oz. plastic bottle

NEW!  For a limited time, you can order actual curly maple wood samples stained with TransTints and finished with a clear gloss polyurethane protective finish. These are the same samples that are used in our store display boards but are smaller sizes. Size of sample varies but measures about 2" x 3". Set of all 19 colors come in a protective heavyweight cardboard box.

TransTint Dye 19 Color Sample Kit  $39.95
(Currently out of stock - lead time is 4-6 weeks)  

 

 

Learn More...........

To read more about mixing and using TransTint dyes click here

For a printer friendly chart to print the TransTint colors below click here.

 

 TransTint Dye colors shown below on curly maple
NOTE: Due to variances in color monitors, colors shown are approximations only.

A "must" color, use for duplicating yellowing of old woods and establishing uniformity to different colored boards.

Yellow undertone, good base color for lighter "Mission Finishes" and for maple.

A brown with a strong red/orange undertone. Good for cherry finishes. Resembles burnt sienna when diluted.

A basic brown with a slight orange undertone.

A very dark brown with a hint of red. Great as a dark shader and toner. Similar to van dyke brown.

A "cool" brown with yellowy undertones. Similar to raw umber.

Red purple undertones.

A pure brown, without too much orange or red.

A lovely, rich caramel color when used in strong mixes (1 oz. to 1 pint). When diluted more, a good color for pine, oaks and lighter woods.

Use this for those classic deep red cherry colors. Great for the "Bombay" dark mahogany look when mixed strong (1 oz. dye to 1 pint solvent).

Bright and clean. Very vibrant.

Like a fire engine. A warm red.

Deep and vivid.

A rich, ebony black.

Bright and clean. Not muddy like some oranges.

A classic purple that's impossible to get if you mix red and blue. Clean, vibrant and a bit on the reddish side.

A scarlet red. Good by itself or mixing with browns to produce deep cherry reds.

A deep, rich emerald-green which replaces #6024 Bright Green.

BACK TO TOP

 Copyright © 2000-2007 Homestead Finishing Products  All rights reserved.
TransTint is a trademark of J.B. Jewitt Co., Inc.