We've
tried just about every sandpaper out there. When asked by our customers to
offer a wider selection of paper, we looked at expanding our 3M offerings,
as well as papers from Norton and other suppliers. We finally came to the
conclusion that the products offered by Mirka offer the best features for
the money.
Mirka's Bulldog Gold paper is every bit
as good as the premium papers from other suppliers and at a modest price.
However, their Royal, Abralon and Abranet series are just plain awesome. I've
been able to eliminate wet-sanding in my shop when rubbing out finishes
using their Royal and Abralon products. When sanding between coats, you
can chuck a piece of 600 or 800 in your random orbit and sand finishes
without cutting through. The premium anti-loading treatment allows you to
clean debris easily from these discs and keep on using them.
SPECIAL - Homestead has partial
boxes and sleeves of some of the Mirka abrasive products that are on
sale here.
Available in boxes or
sleeves of 50 except where noted.
All Mirka products are "P" graded.
For a sandpaper grit
equivalency chart, click
here.
SANDPAPER (Sheets)
GOLDFLEX
SHEETS 9" x 11" - These premium sheets have a
unique flexible backing which allows you to literally wad up the paper in a
ball and it will hold its shape (see right). This feature allows you to sand
intricate profiles easily. It also excels for flat surfaces and wraps easily
around a cork sanding block. It's fast cutting and long-wearing with
it's aluminum oxide grit and heavier B, C and D weight backing (most papers
above 100 use an A weight paper). It's stearated, but does not pose problems
with either our Fuhr or Target line of water base finishes. Use the Goldflex
for bare wood or between coat sanding to produce a very fine, consistent
scratch pattern.
9" x 11"
Sheets
GRITS
(P Designation)
-
50 sheets per sleeve.
100D, 120C, 150C, 180C, 240B, 320B, 400B.
SANDPAPER PSA ROLLS
ROYAL
GOLD PSA ROLLS 2-3/4 x 40 yd. - This is Mirka's
best paper (Royal Gold) with a PSA backing that allows you to simply tear
off the length you want and attach it a custom block or our dual density
sanding block (shown). This paper is perfect for sanding by hand. Can be cut
to fit other profiles like detail sanders. Sold in a box that doubles as a
dispenser.
2-3/4" x
40 yd.
GRITS
(P Designation)
-
Order in boxes
120D, 150D, 180C, 220B, 320B, 400B, 600B.
WATERPROOF SHEETS
WATERPROOF
SHEETS - (Wet-dry) sheets are the best choice
for final sanding and rub out of fine finishes. The silicon carbide/aluminum
oxide grit is exceptionally long
lasting and can be used with either water or solvent lubricants. Their
unique bonding allows the sheet to be folded and not crack. Can also be used
on metal and are perfect for sharpening chisels and planes.
9" x 11" Sheets
GRITS
(P Designation)
-
50 sheets per sleeve.
400A, 600A, 800A, 1000A, 1200A, 1500A, 2000A.
SANDPAPER (Discs)
BULLDOG
GOLD DISCS - These discs come on a B weight
backing, giving the disc better edge wear and wearability. The stearated
aluminum oxide grit provides a fast, uniform cut. We stock these discs in 5
hole and 8 hole in the 5" size and 6 hole for the 6" size. This will cover
the most popular sanders on the market. These discs can also be used with a
standard pad with no punched holes.
5" - 5 hole
hook and loop -- discs for Porter Cable 5" and other Random orbit
sanders.
GRITS
(P Designation)
-
Order in boxes of 50.
80D,
100D, 120C, 150C, 180C, 220C.
5" - 8 hole
hook and loop -- for Bosch, Ryobi, DeWalt, Makita and other Random orbit
sanders.
GRITS
(P Designation)
-
Order in boxes of 50.
80D,
100D, 120C, 150C, 180C, 220C.
6"
- 6 hole hook and loop -- for Bosch, DeWalt, Porter Cable and other
Random Orbit Sanders
GRITS (P
Designation)
-
Order in boxes of 50.
80D,
100D, 120C, 150C, 180C, 220C.
MIRKA
ROYAL GOLD DISCS - These 5 and 6" discs are the
toughest and longest wearing disc Mirka makes. We offer these in grits from
320-1500 for dry sanding finishes. They are perfect for between the coat
sanding, using either a random orbit sander or with the grip faced hand pad
with strap (see below). These discs allow you to dry sand a finish when you
rub it out, which is preferable to wet-sanding. If you wish, you can use the
disc with a lubricant for wet-sanding.
5"
no-hole hook and loop -- for all random orbit sanders and hand sanding
GRITS (P
Designation)
-
Order in boxes of 50.
320B, 400B, 600A, 800A, 1000A, 1200A, 1500A.
6" no-hole hook and loop -- for all random orbit
sanders and hand sanding
GRITS
(P Designation)
-
Order in boxes of 50.
320B, 400B, 600A, 800A, 1000A, 1200A, 1500A.
MIRLON SYNTHETIC
STEEL WOOL
MIRLON
- Mirka's version of synthetic steel wool. Available
in two grits, VF (maroon) and UF (gray), we stock this in two forms, the
standard 6" x 9" pads, and 4" x 10 meter (around 30 ft.) rolls. The silicon carbide grit
gives a more consistent scratch pattern
than the similar 3M product and is close to the effect of 0000 steel wool.
It's particularly nice to have the 4" rolls available, which you can cut
down and use in a jitterbug sander or an in-line pneumatic sander.
NEW! Mirlon 6" Maroon and Gray Discs can be
used on a random orbit sander for fast cutting back of finishes. Or use them
with the 5" hand pad below.
Maroon (VF) and Gray
(UF) available in
4" x 10m rolls, 6" x 9" pads, and 6" discs.
GRITS
(P Designation)
Order per
4" x 10 meter roll, single 6" x 9" pads, or a box (20) 6" x 9" pads -- VF (maroon), UF (gray) .
VF (maroon) UF (gray) discs -- box of 10 only.
ABRALON ABRASIVE PADS
ABRALON
is the hottest product in wood finishing! It combines the best
features of sandpaper and non-woven products, constructed with a abrasive
fabric face, foam center and grip backing. The open weave of the abrasive
fabric allows water or solvent to flow freely, resulting in both
non-clogging and cooling, because the foam retains solvent. This product is
silicon carbide so it works well on both wood, finishes, metal and plastic
and is especially nice on contoured surface. It cleans up easily in soapy
water or mineral spirits. This product was featured in Fine
Woodworking #147 and #149. You can purchase individual pads or in boxes
of 20. For contoured surfaces use the 6" foam interface pad (see below).
Available in 6" hook and loop pads
GRITS (P
Designation)
-
Order single pads or packages of 20.
180, 360, 500, 1000, 2000 and 4000 grit.
ABRALON
ASSORTMENTS
Assortment Kit #1
- Contains 2 each 180, 360, 500, 1000, 2000, 4000, 1 - 5" interface pad, 1 -
6" interface pad, and 1 - 5" backup pad. The backup pad replaces the smooth
vinyl pad on most random orbit sanders with a hook and loop face. The
Abralon can be used with or without the interface pad.
Assortment
Kit #2 -
Contains 1 each 180, 360, 500, 1000, 2000, and
4000, 1 - 6" interface pad and 1 - 5" grip hand pad with strap. An
ideal introductory kit for getting acquainted with Abralon product. The
Abralon can be used without the interface pad and hand pad if necessary.
ABRANET ABRASIVE DISC
ABRANET
is undoubtedly one of the most revolutionary abrasive products on the
market. If your sander has a vacuum assist, you can sand absolutely dust
free! The Abranet disc is a see-through mesh (see photo right) so it
can be used with any multi-hole grip pad. You get improved dust extraction,
elimination of pilling (corning) and a better finish all -around. This is
the best product for topcoat sanding I've used. This product is
aluminum oxide bonded to a fabric mesh (see below) so it works well on both wood, finishes, metal and plastic
and is especially nice on contoured surfaces with a 5" interface pad (see
below).
Available in 5" hook and loop discs
Available in
6" hook and loop discs
GRITS (P
Designation)
-
Order packs of ten or boxes of 50.
5" - 100,
120, 150, 180, 240, 320, 400, 600, 800 and 1000 grit.
6" - 120, 180, 240, 320, 400, 600, 800 and 1000 grit
ABRANET INTRODUCTORY
ASSORTMENT KITS
#9A-232-AP Assortment Kit - (5" DISCS) Contains 5 each
80, 120, 180, 240, 320, 400 and 600 grits,
#9A-241-AP Assortment Kit - (6" DISCS) Contains 5 each
80, 120, 180, 240, 320, 400 and 600 grits,
ABRANET ACCESSORIES
#9955 - Abranet Pad Protector 5" -
This proprietary pad goes
between your sanders standard grip pad and the Abranet disc and ensures a
good grip and prevents premature wear on the pad. Highly recommended. Sold
in packs of 5.
#9966 - Abranet Pad Protector 6" -
This proprietary pad goes
between your sanders standard grip pad and the Abranet disc and ensures a
good grip and prevents premature wear on the pad. Highly recommended. Sold
in packs of 5.
105GVBD - 5" Abranet
Conversion Backup Pad - Converts Black and Decker and Dewalt 5" sanders to grip
Abranet abrasives.
105GVPC - 5" Abranet
Conversion Backup Pad - Converts Porter Cable 5" sanders to grip Abranet abrasives.
906GV - 6" universal hole configuration allows you to use Mirka 6
hole, 6" abrasives discs and Abranet with Festool 6" sanders. Includes 6"
pad, spacing hardware and Abranet protector pad. Fits only certain Festool
Sanders (ones that DO NOT have the quick release pad system)
MIRKA ACCESSORIES
MIRKA
5" GRIP HAND PAD WITH STRAP - This handy pad
allows you to use 5" or 6" discs by hand. It's particularly useful for
between coats sanding to knock the nibs off the finish before applying the
next. It's very flexible and allows you to sand contours without sanding
through. Sold in single pads.
MIRKA DOUBLE
DENSITY SANDING BLOCK - This
2-1/2" X 5" sanding block has two different sides, one hard and the other
soft. Use the hard side for sanding flats and the soft one for contours. It
flexes easily and is perfect for wet-sanding or for use with our Royal PSA
roll sandpaper above. Sold in single blocks.
INTERFACE
PADS - These soft foam pads allow you to easily sand
contours or intricate profiles with standard 5" or 6" discs. Just apply the
interface pad to your hook and loop sander, then put on the disc. Can be
used with hand pad above. Highly recommended when doing the final rub out
with Abralon pads.
Sold in single pads.
CONTOUR
SANDING SPONGES - These flexible pads sand contours as
well as flat surfaces. Ideal for use on the lathe and can be easily washed
after use to remove dust and retain their "bite". The foam backing provides
a comfortable fit in your hand.
Available in aluminum oxide pads 4-1/2" x 5-1/2" x 1/4".
GRITS
(P Designation)
-
Order single pads in 100, 180
and 220 grit.
BACKUP PADS - These grip pads convert your sanders pad
so you can use it with Mirka abrasives.
105GVBD -
Converts Black and Decker and Dewalt 5" sanders to grip
Abranet abrasives.
105GVPC -
Converts Porter Cable 5" sanders to grip Abranet abrasives.
906GV -
6" universal hole configuration allows you to use Mirka 6
hole, 6" abrasives discs and Abranet with Festool 6" sanders. Includes 6"
pad, spacing hardware and Abranet protector pad.
BACK TO TOP
Copyright © © 2000-2007 Homestead Finishing Products. All rights reserved.
