Home Articles Contact Us Our Dealers Dye FAQ's Forum Information
Links MSDS Search Jeff's Schedule Site Map Technical

 

 

PRODUCT AISLES

PRICING & ORDERING INFO 
________

ABRASIVES
-------------------

BOOKS & VIDEOS
-------------------

BRUSHES
-------------------

CLOSEOUTS
-------------------

CONTAINERS
-------------------

FINISHES
-------------------

HVLP SPRAY EQUIPMENT
-------------------

PASTE WOOD FILLERS & GLAZES

-------------------

POLISHING & RUBBING OUT
-------------------

STAINS & COLORANTS
-------------------

SAFETY PRODUCTS
-------------------

TOUCH UP
HIDE GLUE SOLVENTS MISC.

-------------------

USED, B, & CLOSEOUT SPRAY EQUIPMENT
-------------------
 

 

 


 

 

ASTUROMEC HVLP Spray Guns 

This Colorado based company  features a wide selection of pots and the exclusive Bandit design is one of the best 2 quart pressure pots we've used - period. You'll find a pressure pot to suit both your budget and application. Their Jaguar and Lynx guns are very well designed and feature exclusives not found on other guns. 

 

HVLP SPRAY GUNS

 

CAT HVLP SLP Spray Guns

  New!   The Jaguar JSLP  HVLP (gravity feed) and SLP (pressure feed) Spray Guns improve on previous designs  with the 12 point balance plenum design, insuring a finely atomized finish. This is undoubtedly one of the best HVLP guns you can get and breaks up any finish with it's smoke-like atomization. Great for both automotive and wood finishing. Excels at breaking up NGR stains. Only 29 psi inlet pressure required. Made in the USA and has a lifetime warranty.

 

Body: forged anodized aluminum
Fluid passages:: stainless steel 
Needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets
: self lubricating Teflon
Cup: polished aluminum with rotating vent hole 750cc (26 oz)
Working pressure: 29 psi.
Air Consumption: 13.5 cfm
Needle/nozzle/air caps: 0.8, 1.0, 1.3, 1.4, 1.5, 1.7, 1.9, 2.2.

#JSLPxx (NN size)  PRICE: $390.00

   LIFETIME WARRANTY! 

 

 

 

 

Body: forged aluminum
Fluid passages:: stainless steel 
Needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets
: self lubricating Teflon
Working pressure: 29 psi.
Air Consumption: 13.5 cfm
Needle/nozzle/air caps: 0.8, 1.0, 1.3, 1.4, 1.5, 1.7, 1.9, 2.2.

#CATSLPxx (NN size)  PRICE: $385.00

   LIFETIME WARRANTY! 

SYSTEM PRICING:

CATSLP, 2 qt QS64SD dual regulated pressure pot, 6 ft poly hoses - PRICE: $545.00
CATSLP, 2-1/2 gallon QS288SD dual regulated pressure pot, 15 ft poly hoses - PRICE: $715.00
CATSLP, 5 gallon QS640D dual regulated pressure pot, 25 ft poly hoses - PRICE: $865.00

 

LYNX Pressure Feed Spray Gun

The Lynx Spray Gun is a pressure feed gun, and like the Jaguar, it features solid, dependable construction and is made in the USA. It's available two ways. Team it up with a remote pressure pot from C.A. Technologies (gun body shown below), or just buy it with the 1 quart pressure cup attached.

Gun Body: forged anodized aluminum
Fluid passages: stainless steel 
Needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets: self lubricating Teflon
Cup: from remote pressure pot
Working pressure: 40 psi.
Air Consumption: (L300H) 13 cfm
Air Consumption: (L100H) 6 cfm (with 1090 air cap)
Needle/nozzle/air caps
: 1.0, 1.3, 1,5, 1.7, 1.9, 2.2

 

#L300H PRICE: $357.00
#L100H 
PRICE: $350.00 (lo cfm)

  LIFETIME WARRANTY!  

At right, the Lynx 100H can be configured with an attached 1 quart pressurized cup. Makes spraying easy without a remote pressure pot and hoses. Converts easily to remote feed. If you like pressure cup spraying without attached regulators, this unit is the best. Lightweight and easy to maneuver, this gun runs easily off most small compressors. The best feature of this gun is that you can swap nozzles and keep the same needle.

Gun Body: forged anodized aluminum
Fluid passages: stainless steel 
Needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets: self lubricating Teflon
Cup: 1 qt polished aluminum pressure pot
Working pressure: 13 psi.
Air Consumption: (1090* Air Cap) 6 cfm
Needle/nozzle/air caps
: 0.8, 1.0, 1.2, 1.3, 1.4, 1,5, 1.7

Price - $399.00
Price - $449.00
(with 3M H/O PPS Cup) 
 

Jaguar Gravity Feed Spray Gun

The Jaguar J100H is a much lower cfm gun if you have a smaller compressor. Features the same great atomization as the JSLP, but with less compressor. Only 6-8 cfm required, which is in the range of most smaller shop compressors. At this price there is no better gun!

 

Body: forged anodized aluminum
Fluid passages:: stainless steel 
Needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets
: self lubricating Teflon
Cup: polished aluminum with rotating vent hole 750cc (26 oz)
Working pressure: 13-15 psi.
Air Consumption: 8 cfm
Needle/nozzle (mm): 1.0, 1.3, 1.4, 1,5, 1.7, 1.9, 2.2.
Air caps
: 1090/1092

#J100Hxx (NN size)  PRICE: $319.00

   LIFETIME WARRANTY! 

 

 

*Other air caps available, but cfm requirements will increase. Contact us for more info.

 

ASTUROMEC HVLP Spray Guns 

2 Quart Pressure Pots

This 2 Quart Pressure Pot is simple, versatile, and works best with 5' hoses and hung from your belt. Easy to open and clean and will hold up to daily use. Features a safety pop-off valve and is extremely lightweight.

Construction: lightweight aluminum
Regulator: single flow-through
Capacity: 64 oz. (2 quart)
Working pressure
: 50 psi.

#51-130  PRICE: $130.00

 


 

#51-140  Replacement Gasket: $7.50
#51-147 Replacement Check Valve: $7.50

 

The Bandit is the ultimate 2 Quart Pressure Pot, thanks to its clever band clamp cover. This design virtually eliminates stuck lids. No threads to stick or multiple lid clamps to turn.  The underside of the lid, fluid tube and fittings are 300 series stainless steel and the low, squat design prevents tip-over's. Replaceable rigid liners make for easy clean-up. 
"It's Built Like A Tank."

Construction: stainless steel wet parts 
Regulator: single flow-through (shown) or dual
Capacity: 64 oz. (2 quart)
Working pressure
: 80 psi
Gauge: 0-15psi (0-60 psi may be substituted for high viscosity products)


Other BANDIT features include:

bullet

Wide Mouth Opening for Cleaning

bullet

Precise Fluid Regulator with Lock

bullet

Combination Pressure Relief/Pop-off Valve

bullet

Solvent Resistant Padded Handle

bullet

Comes with Rigid Liner

bullet

Made in the USA

#51-600  2 Qt. Bandit Pot: $270.00
#51-600-2 - 2 Qt. Bandit w/ dual regulators: $292.00
#51-620-5 Replacement Gasket (pack of 5): $20.50
#51-637-12  Replacement Rigid Liners (12 pack): $29.75

 

#51-672 - Anti-tip stand for Bandit: $65.00 (also fits QualSpray QS64S)
 

 

 

 

For larger pots please visit our QualSpray lineup here

For a complete listing of hoses, filters, and other general accessories click here.

 

ASTUROMEC HVLP Spray Guns 

The C14 Air Assist Airless pump from CA Technologies is an all stainless 14:1 ratio pump for production fine finish spraying of wood coatings. The air motor features a unique magnetic "no-stall" valve design.

Pump is designed to work with a wide variety of coatings, water based and solvent. 14:1 pump works well with both low and higher solids coatings. Made in the USA.

 

 

 

 

The Cougar gun will be setup to the finish work of your choice. This gun is lightweight and ergonomic and features an integrated fluid filter. Pump and gun can be operated with a 1.5hp compressor.

 

 

 

 

#OC-14-C5-xxx  - C14 pump of cart with pickup tube, Cougar AAA gun and 25 hoses.
PRICE: $1999.00 (Free freight on all pumps shipped within continental US)
#OC-14-EC-xxx - Same as above but economy cart mount (no wheels).
PRICE
: $1850.00 (Free freight on all pumps shipped within continental US)
#OC-14-W5-xxx - Same as above but wall mount.
PRICE
: $1850.00 (Free freight on all pumps shipped within continental US)

xxx = tip size, get number from chart below

Suggested Needle/Nozzles and Tips for Cougar AAA Gun

Finish Type 6" Width 8" Width 10" Width
Thin  307 409 507
Clear lacquers 309 409 509
Conversion Lacquer N/A 411 511

Check with us for recommendations for other products

 

 

BACK TO TOP

Copyright © 2000 - 2007  Homestead Finishing Products  All rights reserved.